Electric Water Heater (boiler) Thermex ER 100V

Description

Electric Water Heater Thermex ER 100V

Safety
Bio-glasslined coating protects the inner tank from corrosion and provides its resistance to temperature changes.

Easy to use
The mechanical controller helps to make the settings literally in one motion.

Economical
High-density thermal insulation made of polyurethane foam allows you to keep hot water longer without additional waste of electricity.

Design
Modern stylish body in a classic white color.
WATER CONNECTION SIZE:  1/2 inches
NET WEIGHT:  25.7 kg
ENERGY CLASS:  C

Includes safety valve, power-line cord

Main technical characteristics

1. Pressure in the cold water line, min/max                                                      0.05 / 0.8 MPa
2. Power supply – single-phase, voltage, frequency                                         ~230 B (±10%), 50 Hz
3. EWH power                                                                                                    1500 W
4. Thread diameter of cold and hot water connections                                    G1/2
5. Water heater protection class                                                                        IPX4
6. Operation at ambient temperature                                                               +3…+40 °C
7. Water heating temperature adjustment range                                             +30…+74 °С
8. Storage temperature accuracy                                                                      ±5 °С

Information about the place of application and method of determination production dates:

The date of manufacture of the product is encoded in a unique serial number located on the

Identification plate (sticker) located at the bottom of the product.

The serial number of the product consists of thirteen digits. The third and fourth digits of the serial

Numbers – the year of issue, the fifth and sixth – the month of issue, the seventh and eighth – the day of issue

EVN.

Specifying Security Measures

1. All installation, plumbing and electrical work must be carried out only by qualified personnel!
2. Electrical safety and anti-corrosion protection of EWH are guaranteed only in the presence of effective grounding, made in accordance with applicable”Rules for the installation of electrical installations” (PUE).
3. During installation and operation of EWH it is prohibited:

• Connect the power supply if the EWH is not filled with water;
• Remove the protective cover when the power is on;
• Use EWH without grounding or use water pipes as groundingpipes;
• Include EWH in the water supply network with a pressure of more than 0.6 MPa. If the pressure in Water main exceeds 0.6 MPa, or is not stable and periodicallyExceeds 0.6 MPa, then at the cold water inlet to EWH, before the safety valve (In the direction of water flow) it is necessary to install an appropriate pressure reducing valve

  (Not included in the delivery set of EWH) to reduce the pressure of cold water to normal. Installation of a pressure reducing valve between the EWH and the safety valve is prohibited;

Placement and Installation
It is advisable to install the EWH as close as possible to the place of use of hot water in order to reduce heat losses in the pipes.
When selecting the installation site, the total weight of the EWH filled with water shall be taken into account. The wall and the floor with a weak load-carrying capacity shall be strengthened, respec-tively. When drilling (making) holes in the wall, it is necessary to take into account the cables, channels, and pipes passing through it. The EWH is suspended using the casing brackets on the anchor hooks fixed in the wall.